Smart Room Control Solution
Distech Controls’ BACnet/IP connected VAV and PTU controller series feature multiple time and cost savings benefits, increasing productivity by over 25%. Available with pre-loaded, configurable graphics which dynamically adapt to the application configurations selected. This virtually eliminates engineering, including programming and graphics development, and increases efficiency during design, installation and commissioning. These controllers support the Smart Room Control Solution, for unified HVAC, Lighting and shades/sunblind control.
Our extensive line of quality, feature-rich HVAC controllers also includes a selection of terminal-level BACnet® and LONWORKS® options for VAVs, fan coil units, chilled beams and heat pump units.
Our HVAC controllers are based on a robust common hardware platform and share the same programming and productivity enhancing toolset, providing increased efficiency and options for system design, installation, service, and maintenance.
Unified Solution for Increased ROI
The Smart Room Control Solution delivers energy savings in excess of 30% on HVAC and 60% on lighting, resulting in the lowest total cost of ownership via unified control with only one product configured.
Lowest Total Cost of Ownership
- Only one product configured
- Simplifies design, reduces installation time and costs, improves maintenance and serviceability, and increases reliability of multi-application integration
Energy Savings Delivered
- Using unified occupancy-based control strategies, daylight harvesting based on light level sensing and natural light optimization
- The automation of shades/sunblind increases the insulation factor of windows
Innovative ECO-Vue™ Leaf Pattern
- Available on the Allure EC-Smart-Vue and my PERSONIFY mobile app
- Graphically indicates energy consumption in real-time and encourages occupants’ energy-conscious behavior.
Personalized Comfort
The Smart Room Control solution delivers improved Indoor Environmental Quality for a comfortable building and increased occupant welfare, satisfaction and productivity.
- Occupants can adjust temperature, lighting and shades/sunblind settings using the room device of their choice
- This variety of available room devices and the convenience of a mobile app addresses the requirements of LEED® Credit 6.2: Controllability of Systems—Thermal Comfort
- Eliminates the need for multiple devices by streamlining temperature, lighting, and shades/sunblind control
- The automation of shades/sunblind based on indoor and outdoor light levels allows occupants to benefit from increased natural light, while avoiding harsh glare and direct heat from the sun when present
Choose from the Allure EC-Smart-Vue communicating sensor, to the EC-Remote and my PERSONIFY mobile app
Ease of Installation and Configuration
Expansion modules can connect to the extended HVAC controller on a sub-network.
One sensor delivers occupancy status, light level, and temperature readings.
Control:
- up to 8
- Light loads up to 8 shades/sunblind motors or motor groups
And support:
- Up to 4 EC-Multi-Sensor and 4 Allure communicating sensors
Proudly Featured In
Want to gain a more in-depth understanding of the benefits of Smart Room Control? Be sure to read one of the following articles put together by the Distech Controls team:
Download Our Smart Room Control Brochure
Learn how you can achieve personalized comfort and increased ROI with Distech Controls' Smart Room Control solution.
DOWNLOAD An Award Winning Product
The Smart Room Control solution has been recognized by industry leading associations.
2015 HVR Sustainable Product of the Year
Named Sustainable Product of the Year, as part of the HVR Awards 2015, which highlights companies that have identified new environmentally-friendly products and successfully brought them to market.
2014 AHR Expo Innovation Honorable Mention
Selected by a panel of judges made up of ASHRAE members, as an AHR Innovation Award honorable mention in the Building Automation category.
HVAC Control
Choose ECB series BACnet controllers, ECL series LonWorks controllers, or ECY ECLYPSE Connected BACnet/IP and Wi-Fi controllers for terminal equipment applications with built-in features and logic for lighting and shades/sunblind control. Control up to 8 lights and 8 shades/sunblinds with the expansion modules.
-
Products and Models
-
ECLYPSE Connected VAV Controller – ECY-VAV Series
Control any variable air volume application out of the box. Also features a model with power over Ethernet.
-
ECLYPSE Connected Terminal Unit Controller - ECY-PTU/TU Series
Designed to control terminal units such as fan coils, chilled beams, heat pumps, and radiant/reversible ceilings.
-
ECLYPSE Wi-Fi Adapter
The ECLYPSE Wi-Fi Adapter enables wireless connectivity options for ECLYPSE controllers, including Wi-Fi client, access point, and hotspot.
-
BACnet® HVAC Controllers
-
Products and Models
-
ECB-103
For two pipe fan coil, chilled ceiling, heat pump, and unit ventilator applications
-
ECB-VAV-N
For applications with large damper VAV boxes or existing damper actuators
-
ECB-VAVS
9-point controller ideally suited for cooling only and cooling with reheat VAV applications
-
ECB-PTU Series
For fan coil, chilled ceiling/beam and heat pump applications
-
LONWORKS® HVAC Controllers
-
Products and Models
Sunblind Control
ECx-Blind expansion module to control Shades/Sunblind: up/down, tilting and angle rotation.
Suitable for various applications: venetian blinds, sun shades, and façade blinds.
-
Products and Models
-
ECx-Blind Series
The ECx-Blind Series Expansion Modules are microprocessor-based interfaces that extend the number of inputs and outputs provided by the ECL/ECB-PTU Series controllers as well as ECY/ECL/ECB-VAV controllers.
-
Lighting Control
ECx-Light expansion modules to control lights - ON/OFF or dimming. Enables the automated control of lighting based on natural light levels and occupancy.
-
Products and Models
-
ECx-Light Series
The ECx-Light Expansion Modules are microprocessor-based interfaces that extend the number of inputs and outputs provided by the ECL/ECB-PTU Series controllers as well as ECY/ECL/ECB-VAV controllers.
-
ECx-Light-4DALI
The ECx-Light-4DALI Expansion Modules are microprocessor-based interfaces that extend the number of inputs and outputs provided by the ECL/ECB-PTU Series controllers as well as ECY/ECL/ECB-VAV controllers.
-
Occupancy Detection
Optimize your building’s energy use according to real-time conditions.
-
Products and Models
-
EC-Multi-Sensor-BLE
The EC-Multi-Sensor-BLE is a compact, "4-in-1" communicating device. With just one wire and one connection, this device effectively combines (1) a motion detector, (2) a light sensor, (3) a temperature sensor, and (4) a Bluetooth® low energy technology transceiver for the wireless control of comfort from a mobile phone.
-
EC-Multi-Sensor Series
The EC-Multi-Sensor Series combines a motion detector, a light sensor, a temperature sensor, and an infrared receiver in a single compact device.
-
Personalized Comfort
Occupants can adjust temperature, lighting and shade/sunblind settings in the room to achieve a level of personalized comfort
-
Products and Models
-
EC-Remote Series
The EC-Remote Series remote controls allow users to remotely manage all the comfort parameters of a room: lighting, shades/sunblinds, temperature, fan speed and occupancy.
-
Allure UNITOUCH™
This cutting-edge touchscreen sensor enhances occupant experience with its inviting user interface and modernises the BMS room device portfolio with its contemporary design.
The Allure UNITOUCH can be used for a wide range of HVAC, lighting, and sunblind applications, making it an ideal all-in-one addition to Distech Controls’ Smart Room Control solution. Its 3.5”, high-resolution capacitive touchscreen is easy to view and simple to use, allowing for the control of these applications using a single device. Furthermore, this communicating sensor allows for the wireless control of comfort from a mobile phone by using Bluetooth® low energy technology.
This product series includes different models, with a choice in sensing capabilities (temperature, humidity, CO2) and colour (black, white).
-
Allure EC-Smart-Vue
Advanced communicating sensor with four integrated sensors: Temperature, humidity, CO2 and motion. Features innovative ECO-Vue™ leaf pattern.
-
Allure EC-Smart-Comfort
Occupant-focused, communicating room sensor, providing precise temperature sensing, and optional lighting and shade/sunblind control, for an all-in-one room device. Recipient of the 2016 AHR Innovation Awards’ honorable mention in the Indoor Air Quality category.
-
my PERSONIFY Mobile App
Welcome to my PERSONIFY, the app that allows you to easily customize your comfort settings directly from your mobile device through its intuitive interface.
The my PERSONIFY app uses Bluetooth® technology and is compatible with Distech Controls’ BLE-Enabled Enhanced Occupant Experience product line: Allure UNITOUCH and EC-Multi-Sensor-BLE.
-
Products and Models
-
my PERSONIFY Mobile App
Welcome to my PERSONIFY, the app that allows you to easily customize your comfort settings directly from your mobile device through its intuitive interface.
The my PERSONIFY app uses Bluetooth® technology and is compatible with Distech Controls’ BLE-Enabled Enhanced Occupant Experience product line: Allure UNITOUCH and EC-Multi-Sensor-BLE.
-
